PL2 - Plain Legged interlocking Universal Vented ridge tiles PL2 80º to 120º angled ridge ( for roof pitches from 30º to 50º ) and PL1 universal ridge tiles 120 - 160º ridge ( for roof pitches from 10º to 30º ) are both easily vented simply by using a roll out ridge roll. The ridge tiles are available ex UK stock in natural red, Weathered red and Anthracite slate, the latter being through colour.
CR2 - Capped Ridge - universal ridge angles 80º - 120º for roof pitches 30º to 50º. Mechanically dry fixed capped ridge tiles.
Our new CR2 ( VENTED CAPPED ridge tile ) is here !!!
ALL our ridge tiles are designed to be mechanically fixed ridge tiles / dry fixed ridge tiles, very easily vented and all produced by CS Coelho da Silva. One of the most prestigious and highest quality clay tile manufacturers in Europe.
Every single CS ridge tile, ranging from the new Capped angle ridge tile and the Interlocking CS Plasma PL Universal and MR1 ridge tiles have been designed to be fitted with a single stainless steel screw and an aluminium CE certified clip, which are included in the selling price.
Looking to install Vented dry fixed ridge tiles? then look no further, Simply ask us for the roll out ridge roll system ( or use your own ridge rolls , fit that on your ridge line then install our ridge tiles as you would usually do and that's it..... All done.
No Fuss, no plastic in sight.
Why use CS ridge tiles?
Are there any advantages for the roofer? 60% less time to fit ! You can fit approximately 2 linear metres of our ridges per minute.
No Mortar to mix on the ground to then hoist up onto the roof, that saving of time, effort and money alone makes our ridges financial sense.
No mortar to stain your tiles or slates.
Why is it easier and quicker to fit? Well, 2 stainless steel screws are supplied, screw one into the ridge board through the ridge tiles and you've finished, mechanically fixed at both ends as per BS5534 requirements.
You won't need lots of washers, screws, plastic butting strips and god knows what else.
Advantages for the merchant? All our ridge tiles are universal angled, therefore far less stock needed on the ground tying up your cash flow. Its far more economical to purchase our CS range, increase your margins, reduce stock, increase cashflow and still beat your competitors on price.
MR1 Mini Ridge tile is for 10º to 45º pitch roofs ( 90º to 160º ridge angle ), as the name suggests is a little smaller than the new capped ridge tile / collared ridge tile.
For the Stockist: the PL2 interlocking Plain Legged universal ridge and the CR2 Capped Universal ridge will cover most of the UKs roof pitches, allowing you to sensibly reduce your stock levels as well as purchasing far more economically than your competition thereby increasing your profit margin.
Mortar lovers amongst us can continue to use mortar and still comply with regulations by using the stainless steel screws supplied. Whether we like it or not mortar bedded ridge and hip tiles have proven to become insecure over time, as a result those heavy items over your head become dangerous to the home owner. Our CS mechanically fixed ridge tiles become the best solution for this problem.
Modern construction methods require a secure and safe fixing method for tiles, ridges and accessories.
How many columns?